The Cularis is the logical development and next step from the EasyGlider and is a great introduction into using a “full house” wing glider within the world of model gliding. This is the perfect glider for the club or weekend slope pilot.
Features
• Minimal cost
• Minimal building effort
• Minimal risk of breakage thanks to robust ELAPOR® foam
• Four-flap wing: camber-changing flaps and butterfly (crow) / landing aid function
• Optional electric power set with ample power
• Broad performance spectrum, including aerobatics and thermalling
• Wide speed range
The Cularis can be built as a glider or electric glider. For the electric version we recommend the dedicated power set, # 33 2633. With the recommended battery this power system provides 6 to 8 climbs to around 150 m on a single charge. If you want more power, simply fit a larger propeller (e.g. 12 x 8” or 13.5 x 7”); this gives a better rate of climb at the cost of reduced motor run times. The set also includes a glider nose cone in which an optional aero-tow coupling can be installed. The model can then be flown as a glider and launched by aero-tow. Our MAGISTER makes a great tug for the Cularis.
Innovative features:
• The mechanical retainer system engages automatically when the wings are plugged
in; at the same time the servos are connected electrically, eliminating the tedious task
of connecting the wing-mounted servos.
• The all-moving tailplane is also removable, with an automatic retainer system.
Design features:
• Two carbon wing spars for ample strength
• Like the all-moving tailplane, the wings can be unlocked and removed very simply,
making transport straightforward
• GRP reinforcements in the fuselage and tailplane
• Polycarbonate fuselage nose reinforcement
• Wing-mounted servos covered by protective fairings
• All the electronic components have a pre-defined position in the model.
Wingspan: 2610 mm
Length: 1260 mm
All-up weight: glider @1400 g/ electric @1680 g
Wing area: 55 dm²
Wing loading: @27 g / dm²
Functions: Elevator, rudder, aileron and butterfly (crow)
Kit contents:
Moulded ELAPOR components
CFRP and GRP spars
Injection-moulded parts including motor bulkhead
Small items and linkage components
Decal sheet
Comprehensive illustrated building instructions
Recommended Servos & Leads
4 x Nano-S servo - 6 5120
2 x Tiny-S servo - 6 5121
1 x “Cularis” cable set # 8 5055
Other Items Required
Transmitter with crow break mixing
Receiver
Battery
Also Required for electric version
Cularis power set - 33 2633
LiPo battery 3S 2100 for power system
View Basket
Secure payments through Barclays