Click to view our recently updated products Click to view our most recently added products


E-Flite Pogo 15e ARF

Price for One £115.99
   
Manufacturers code EFL4200
Delivery In Stock
 
Qty




Power On Go! That’s the just what you can do with the LR1A Pogo 15e, from E-flite. This sporty model bears more than a passing resemblance to the Goodyear racers from the 1950s, offering sleek lines and plenty of exhilarating performance for sport aerobatics. Designed by Jerry Small to give intermediate to experienced modelers a stylish sport model that can also be flown as a pylon racer it will accept a variety of power installations. In “Sportster” mode the standard set-up of the E-flite Power 15 brushless motor, 40A ESC and 3S LiPo pack provides more than enough power for exciting aerobatic performance, if however you really want to burn up the sky install the potent combination of a Power 25 brushless motor, 60A brushless ESC and high-C 4S LiPo pack and you have a “Speedster” ideal for pylon racing turning in lap speeds in excess of 100 mph.
The Pogo features traditional balsa/plywood construction throughout with a racy high visibility Ultracote covering and a pre-painted sleek fibreglass cowl with an innovative design that makes installation (or removal) quick and easy.
At the flying field swapping batteries and accessing the electronics is easy thanks to the generously proportioned easy-access magnetic cockpit/hatch, complete with pre-painted race helmeted pilot figure. With only three mini servos controlling the aileron, elevator and rudder controls the overall weight of the model is kept to a minimum and the whole installation and set-up of the Pogo is a simple task made even easier thanks to E-flite’s assembly guide and hardware pack.
So if you are looking for a smooth flying ARF model that’s perfect for sport flying or pylon racing try the Pogo, you won’t be disappointed!


Features
Lightweight balsa and plywood construction makes for simple assembly Genuine Ultra Cote Trim scheme Easy to transport two piece plug in wing Painted one piece fibreglass cowl offers great looks and easy maintenance Added realism with the painted pilot figure.Flight Requires just three mini servo’s. Quick assembly time flight battery easily accessible through magnetic top hatch.makes for simple assembly.



Technical Specification
Wing span 1240mm (49.0 inch)
Length 900mm (35.4 inch)
Wing Area 16.5 sq dm (255 sq inch)
Weight (with battery) 1.5 – 1.6kg (3.25 – 3.40 lb)
Weight (without battery) 1.2 – 1.3kg (2.63 – 2.75lb)
Radio required 4+ channel with 3 mini servos


Required to Complete (NOT INCLUDED)

Recommended Power Set Up 4+ channel with 3 mini servos
Motor E-flite Power 15 Brushless Outrunner 950Kv
Speed Controller 40Amp Brushless
Battery: 3 cell 11.1Volt 3200Mah Li-Po
Prop 10 x 10 Thin Electric
Spinner: 2 inch Aluminium
Radio: Spektrum DX6i/DX7
Receiver Spektrum 6channel AR6200
Servos 3 Micro Servos

Recommended High Power Set
Motor E-flite Power 25 Brushless Outrunner
Speed Controller 60Amp Brushless
Battery 4 cell 14.8Volt 2500Mah Li-Po
Prop 8 x8 Thin Electric
Spinner 2inch Aluminium
Radio Spektrum DX6i/DX7
Receiver Spektrum 6channel AR6200
Servos 3 Micro Servos

Your Basket
Items: 0
Total: £0.00
View Basket

View Our YouTube Channel View Model Maniacs Online View Our Facebook Channel