Home > Aircraft (Powered) > Electric Trainers > Ultrafly Tutor 32E ARTF with Motor ESC & Servos

Ultrafly Tutor 32E ARTF with Motor ESC & Servos

Fast & Easy Assembly – The Tutor is supplied almost ready to fly. It has been carefully constructed of traditional balsa and ply. All control surfaces are factory hinged, installed and factory connected to servos. To trim the model in flight, use your radio trims or easily adjust the pushrods at each of the servo’s easy connectors. To complete the model, just glue the wing halves together, install the wheels & motor, install your receiver, charge the battery, and you are ready for a pre-flight check and first flight. While you are charging your battery, you will be finishing the model.

(Please note this model was formally known as the Ultrafly Mentor)

Motor & ESC are included – You don’t have to worry about tuning a glow engine anymore! You don’t have to worry about the right motor, gear & propeller. Ultrafly have included their Ultrafly F/18/10 brushless motor, Athena-28A brushless Electronic Speed Control & a 10 in. X 5 pitch Electric power specific propeller. The perfect power system combination for your success! Just connect the ESC, install the propeller and your power system is ready! If you want a little more speed, replace the propeller with a 10 in. X 7 pitch E style prop.

Slow & Stable Flying, Ideal for beginners – The model weighs only 1.47kg (3.2lb) with a 44g/dm2 wing loading. This light wing loading contributes to Tutors’s extremely low stall speed thus helping the pilot with slow speed flying and landing approaches. These slow air speed characteristics also allow the pilot to fly in a calmer, more comfortable manner. The specially designed wing airfoil provides very stable flying performance. The same airfoil design will also easily fly in windy conditions. If windy conditions persist at your flying site, it is recommended that the prop be changed to a 10X7E propeller for better headwind penetration. Control surfaces include Rudder, Elevator, Aileron & Front wheel for on ground steering. Mentor 32 is the idea trainer model as well as a great FUN Sporty Flyer!


Battery advise – For extended flying times it is recommended that you use a 3300mAh 3S 11.1v Lipo battery on the model. It will provide 7.5 - 11min of flying time dependant on throttle usage!


The following items are required to complete the model:
A minimum of a 4 channel radio with receiver
FlightPower EVO25 2500-3700mAh 11.1v LiPo Battery Pack
Suitable LiPo charger

Colour may vary from that shown - Call if a specific colour in needed