|
Aircraft Fittings
Aircraft Fittings
 |
Pre made wiring loom for gliders with 4 servo wings. Complete with plug in wing connectors and Uni end fittings (for servos and receiver) & ferrite rings. Fits most gliders up to 4m. |
| |
 |
Foam padding with quick-secure velcro strap for receivers/nicads. |
| |
 |
This handy sprung loaded latch is simple to mount, and easy to use, and provides a very neat solution to securing hatches, canopies, etc to your model. |
| |
 |
Servo Mount to fit servo type Graupner/JR. Sold in pack of two Ref: GR11
Fits C261, C281, NES371 & DS381 |
| |
 |
Servo Mount to fit servo type Graupner/JR. Sold in pack of two Ref: GR1
Fits - 3301, C3321, DS3328 & C3341 |
| |
 |
Servo Mount to fit servo type Graupner/JR. Sold in pack of two Ref: GR13
Fits NES/DS331, NES/C341, NES/C351, DS361 & DS368 |
| |
 |
Double sided black foam tape in a large sheet for installing servos, gyros or other items. Manufactured from slightly thicker material, it is ideal for mounting components that need vibration isolation. |
| |
 |
Dubro heavy duty closed loop control systems (4-40) for rudder, elevator, tail wheels, etc. |
| |
 |
Dubro standard closed loop control systems (2-56) for rudder, elevator, tail wheels, etc. |
| |
 |
Glider Towhook with contra plate abutment. Robustly dimensioned tow-launch hook moulded of GRP-reinforced nylon. Dimensions approx. 51 x 11 x 8 mm
|
| |
 |
The set contains all the parts required to produce a detailed, true-scale cockpit in any glider built to a scale of about 1:3.5.
|
| |
 |
Just like the full-size! Why not fit out your gliders and power models with a scale cockpit? |
| |
 |
Just like the full-size! Why not fit out your gliders and power models with a scale cockpit? |
| |
 |
These items are a new version of the airbrakes which have been in widespread use for years. They now feature a double lock, i.e. the retracted airbrake is locked at the inboard and outboard actuating arms. This effectively prevents the airbrakes being sucked out at high speed. |
| |
 |
These items are a new version of the airbrakes which have been in widespread use for years. They now feature a double lock, i.e. the retracted airbrake is locked at the inboard and outboard actuating arms. This effectively prevents the airbrakes being sucked out at high speed. |
| |
 |
ABS cover for wing servos. |
| |
 |
Velcro (hook-and-loop) cable ties can be used anywhere in a model where you need to be able to remove the secured parts quickly and easily. For example, rechargeable batteries can be fixed quickly and securely to a suitable plate glued in the fuselage using these ties. Receivers can also be secured by this method. |
| |
 |
This wing panel-coupling device replaces the commonly used elastics. It ensures a tight fit of the wing panels against the fuselage, with dowels and steel tongues, respectively, taking the loads. |
| |
 |
This three-part wing retainer system consists of two special bolts which are mounted in the left-hand and right-hand wing roots, and a centre section into which the bolts engage when you plug in the wings. Both wing panels are automatically held tightly in place. |
| |
 |
M2 Threaded rod, 8 inches long - for use with M2 clevis |
| |
 |
A simple, reliable and elegant method of connecting the aero-tow cable to the nose of a glider for aero-towing. |
| |
 |
Float set for the Multiplex Mentor and other models up to around 2000 g all-up weight. |
| |
 |
Just like the full-size! Why not fit out your gliders and power models with a scale cockpit? |
| |
 |
Realistic Light Set For Models
Enhance your model with our lighting set! Angular dispersion, colours and flashing LEDs replicate the lighting systems generally found on full-size aircraft. |
| |
 |
The MULTIlock wing and tail retainer system makes your models fast and straight forward to rig at the flying field, and holds the components together very well in flight. If overloaded (e.g. due to landing shock) the retainer system “gives”, absorbing energy, and the wing slides out several centimetres from the fuselage. |
| |
 |
25 mm wide, 60 mm long (contents: five of each, hook / loop tape strips) |
| |
 |
Wing servo boxes for easy fitment of servos in wings.
Suitable for Multiplex Tiny-S/MG and Polo Digi4 servos, also Hitec HS81, 81MG, HS85 and 85MG servos |
| |
 |
Neaten the pushrod exit with a moulded guide. Add virtually no weight and improve the finished linkages appearance considerably. |
| |
 |
Virtually indestructible receiver box that survives even when run over by a truck! Foam packing & screws included. |
| |
 |
Remote glow assembly for aircraft, helicopters & cars. Use this whenever you need super-convenient starting. The female jack socket is attached to a convenient point on your models' exterior bodywork or cowl. The supplied jack plug lead with glow plug end is then connected with your glow starter to provide power to the glow plug. |
| |
 |
This complete remote glow plug system allows the glow plug to be ignited from the fuselage sides or cowling on many different types of model. It provides a safe and neat fixing, and it may be mounted in an easily accessible position keeping glow plug igniters away from the engine. Each unit is complete with a rubber cap lead, mounting bracket, screws, and glow plug sized voltage pickup. |
| |
 |
Simple, lightweight & effective, these brand new Safety Lead Locks make securing servo extension leads a doddle. Don\'t risk a plug pulling out of a socket – just pop a Safety Lead Lock on and you know it\'s really secure. |
| |
 |
Neaten the pushrod exit with a moulded guide. Add virtually no weight and improve the finished linkages appearance considerably. |
| |
 |
Power pod and spinner assembly for the Multiplex Xeno.
Contains items to make the power pod, including adaptors for 3mm and 4mm motor shafts. Note:- Motor and blades not included
|
| |
|
Your Basket
Popular
|
View Basket
Secure payments through Barclays