---

	Adjustable Aluminium Horn M4 - 3676.4 £7.99 Suitable for control surfaces at least 10 mm thick. Horn length can be adjusted in 0.5 mm increments within the range 8 to around 15 mm. Material: Aluminium, threaded M4.
	To order and select specifications click here	More Info

---

	Adjustable Brass Horn M3 - 3676.3 £6.99 Suitable for control surfaces at least 9 mm thick. Horn length can be adjusted in 0.5 mm increments within the range 6.5 to around 13 mm. Material: Brass, threaded M3
	To order and select specifications click here	More Info

---

	Glass Filled Nylon Bell Crank Large - MMOL5021 £1.49
	To order and select specifications click here	More Info

---

	Glass Filled Nylon Bell Crank Small - MMOL5020 £1.29
	To order and select specifications click here	More Info

---

	Glass Filled Nylon Horns Large - MMOL5051 £1.49
	To order and select specifications click here	More Info

---

	Glass Filled Nylon Horns Small - MMOL5050 £1.29
	To order and select specifications click here	More Info

---

	Glass Filled Nylon V Tail Horns Large - MMOL5061 £1.49
	To order and select specifications click here	More Info

---

	Glass Filled Nylon V Tail Horns Small - MMOL5060 £1.29
	To order and select specifications click here	More Info

---

	Glass filled Scale Horns. (2) - MMOL5071 £2.79 High quality Glass filled scale type nylon control horns.
	To order and select specifications click here	More Info

---

	Graupner Hinge tape, crystal clear - 693.1 £2.99 Thin flexible plastic tape, pressure-sensitive type, 10 m long. Permits gap-free, aerodynamically clean hinging of ailerons. Tape is applied at top side of wing over the entire span of the ailerons, preventing equalization of pressure between upper and lower wing surface via aileron gap.
	To order and select specifications click here	More Info

---

	Heavy Duty Servo Horns (Futaba) - HFL1063 £1.99 Set of heavy duty servo horns suitable for Futaba servos.
	To order and select specifications click here	More Info

---

	Heavy Duty Servo Horns (JR/Graupner/Spektrum) - HFL1062 £1.99 Set of heavy duty servo horns suitable for JR/Graupner/Spektrum servos.
	To order and select specifications click here	More Info

---

	Multiplex Alum. ring-screw, M4, 6 pcs. - 713863 £2.99 The simple, slop-free method of actuating all types of control surfaces. Drill a pilot-hole, apply 5-minute epoxy and screw the ringscrew in the hole.
	To order and select specifications click here	More Info

---

	Multiplex Brass ring-screw, M3, 6 pcs. - 713858 £2.99 The simple, slop-free method of actuating all types of control surfaces. Drill a pilot-hole, apply 5-minute epoxy and screw the ringscrew in the hole.
	To order and select specifications click here	More Info

---

	Multiplex Control horn, size 1, 2 pcs. - 703022 £2.29 Screw-fitting horns with spreader plate Moulded in tough plastic, bored for metal and plastic clevises.
	To order and select specifications click here	More Info

---

	Multiplex Control horn, size 2, 2 pcs. - 703023 £2.25 Screw-fitting horns with spreader plate Moulded in tough plastic, bored for metal and plastic clevises.
	To order and select specifications click here	More Info

---

	Multiplex Control surf. hinge small, 10 pcs. - 702003 £3.99 Pre-assembled pinned hinges Robust, free-moving plastic hinges with metal pivot pins.
	To order and select specifications click here	More Info

---

	Multiplex Control surf. hinge, large, 10 pcs. - 702007 £3.99 Pre-assembled pinned hinges Robust, free-moving plastic hinges with metal pivot pins.
	To order and select specifications click here	More Info

---

	Multiplex Horn for foam models, 2 pcs. - 703206 £1.69 Special glue-fitting horn for all-foam models # 70 3206- Fix with 5-minute epoxy. Contents: 2 horns
	To order and select specifications click here	More Info

---

	Multiplex Mini-horn, push/glue fit, 11 mm, 6 pcs. - 703026 £3.69 Glue-fitting horn Small, lightweight horns for rudder, elevator and aileron linkages
	To order and select specifications click here	More Info

---

	Multiplex Mini-horn, push/glue fit, 20 mm, 6 pcs. - 703027 £3.49 Glue-fitting horn Small, lightweight horns for rudder, elevator and aileron linkages
	To order and select specifications click here	More Info

---

	Multiplex PVC Hinges 6 pcs - 703202 £1.99 Flat hinge, each leaf 12 x 14 mm, simple to fit, even in thin control surfaces.
	To order and select specifications click here	More Info